after hardening meaning in English
后固化；后硬化
后期坚膜
后期硬化
滞后硬化
Examples
- Products and systems for the protection and repair of concrete structures - test methods - determination of fatigue under dynamic loading - after hardening
混凝土结构的修理和保护用产品及系统.试验方法.硬化后,在动态负载下疲劳强度的测定 - Products and systems for the protection and repair of concrete structures - test methods - determination of fatigue under dynamic loading - part 2 : after hardening
混凝土构件的防护和维修的产品和系统.试验方法.动荷载疲劳测定.第2部分:淬火后疲劳测定 - 4 when keeping the cement quantity and water ratio changeless , it will increase the slump constant for at least 10cm to mix into fnj l , and the concrete strength after hardening is equal to the reference concrete
2用于夏秋季节施工和大面积滑模施工。调节掺量，可有效地控制砼的凝结时间，掺量可调范围大，塌落度损失小。 - As shown in the figure left , the inner ring of the self - contained bearing is hardened in the race - way and surroundings part where hardening is necessary , the area of set screw hole of the inner ring has been templed by high temperature after hardened , it has higher toughness and impact clasticity
如左图所示，内圈沟道及其周围需要淬硬的部分已经过正常淬火，装配紧定镙钉的内圈伸长端则经过高温局部回火而保持韧性及抗冲击性。 - Specially , the axial tensile strength of the interface of the new and old concrete has reached above 2 . 40mpa , greatly surpassing the preconcert goal ( > 1 . 0mpa ) , and its flexural strength also above 5 . 80mpa , having surpassed the preconcert target and the standard request ( 4 . 50mpa ) . ( 2 ) after hardening 4h and 8h the compressive strength of the patched concrete is bigger than 20 mpa , which can satisfy the request of fast patching . ( 3 ) the ych color material , which is mixed into rapid sulfoaluminate cement - concrete patching material , can take better effect and avoid chromatism on the appearance of new - old concrete
特别是新老混凝土界面的轴向抗拉强度已达2 . 40mpa以上,大大超过原定目标(大于1 . 0mpa ) ,其界面抗折强度也在5 . 80mpa以上,也已超过原定指标及规范要求(大于或等于4 . 50mpa ) ; ( 2 )修补混凝土硬化后4h 、 8h抗压强度大于20mpa ,能满足快速修补的要求; ( 3 )在快硬硫铝酸盐水泥混凝土修补材料中掺入自配的ych调色材料,能较好地起到调色作用,避免新老混凝土表面色差。